Hotronix Dual Air Fusion IQ
Description
Stop waiting on your press.
Start running continuous production.
If you're sitting idle between press cycles, you're leaving time and money on the table. The Dual Air Fusion IQ gives you two stations, one heat head, and a workflow that never stops — load one side while the other presses.
This is how high-volume shops scale without adding operators.
Load & Position
Thread the garment onto the lower platen and position your transfer. Full Threadability™ means no seams or obstructions to work around.
Shuttle & Press
Rotate across and let the air-powered head do the work. Consistent heat and pressure, every single cycle — no operator feel required.
Load the Next Job
While side one is pressing, set up the next garment on the free station. Zero idle time.
Rotate & Repeat
Once you find the rhythm, the machine sets the pace — not you. This is how real production runs.
Control without complexity.
No more notebooks full of press settings. The Fusion IQ controller stores your recipes, tracks production cycles, and connects to the Hotronix Cloud — full reporting and remote management without the guesswork.
- Save and recall press recipes instantly
- Multi-stage pressing — apply and post press in one sequence
- Larger, higher-resolution touchscreen
- Built-in troubleshooting and self-diagnostics
- Production cycle counter and auto on/off
- Connect to Hotronix Cloud for reporting and updates
One press. Every part of the garment.
Most presses make you fight with seams, zips, and collars. Full Threadability™ means the lower platen rotates and repositions so garments thread on cleanly — no obstructions, no awkward repositioning, no missed spots.
With an interchangeable platen system and over 10 shapes and sizes available, you can tackle sleeves, hems, left chests, hat bills, shoe tongues, can coolers, and more — all on the same machine.
- Mix and match platens across both stations — small plate on station 1 for left chest, sleeve plate on station 2 for the arm, all in one run
- Auto Adjust Pressure™ detects the platen in use and automatically calibrates pressure — no manual readjustment between sizes
- Consistent results across every platen swap, every time
- Expand your decorating capability without adding equipment
Engineered for throughput.
Not guesswork.
Cheap presses create problems you shouldn't have to think about — cold spots, inconsistent pressure, ruined garments. The Dual Air Fusion removes those entirely.
Air-Powered Consistency
Repeatable, even pressure every cycle. No operator feel required — set your recipe once and replicate it perfectly, every time.
Digital Time, Temp & Pressure
Full digital readouts on all three variables. No analogue guesswork — every setting is precise and repeatable.
Independent Station Control
Run each station at different settings simultaneously — ideal for DTG pre-treatment and post-cure in one machine.
Auto Adjust Pressure™
Programme up to four time and pressure combinations that adjust automatically throughout your press cycle.
Hotronix Cloud Portal
Generate performance reports, manage users, and monitor your press fleet — all online through the Hotronix portal.
Built to Last
Die-cast corrosion-free base and assemblies. This is equipment you build your business around — not something you replace every few years.
Key specs & optional platens.
Key Specifications
Recommended: 1 HP, 8 gal tank, 120 PSI, 3.8 CFM
Equipment you build your business around.
Experienced decorators say they wish they'd upgraded sooner — not later. That confidence starts with knowing your press is backed for the long haul.
Add ProPlace IQ.
Take alignment errors out of the equation.
ProPlace IQ projects your design directly onto the garment before pressing — eliminating misalignment, reducing wasted transfers, and speeding up your layout time. For high-volume shops, this is a serious efficiency upgrade.
ProPlace IQ Retrofit
Add ProPlace IQ to your existing Dual Air Fusion press. The retrofit kit installs directly onto your machine — no new press required.
View Retrofit Kit
Dual Air Fusion IQ + ProPlace IQ
Get the Dual Air Fusion IQ with ProPlace IQ included from the outset — the complete setup for shops serious about precision and throughput.
View Full Package
Download the official operator manual for setup guides, press settings, and maintenance instructions.
Hotronix Dual Air Fusion IQ — Operator Manual ↗